Previous Topic   Next Topic   Contents   Commands
by Function		   Commands
Alphabetically

TRACK Kcycle Commands

Use the Track Kcycle Dialog to set these parameters.

Filter Particle Tracks by Kcycle number in a KCODE criticality calculation. A single cycle may be specified, or a Min and Max range.

TRACK Kcycle

Report on the status of the Kcycle filters.

TRACK Kcycle { MIn | MAx } N

Set the Kcycle Min or Max limits to N.

TRACK Kcycle N

Set both the Kcycle Min and Max limits to N.

TRACK Kcycle { BAck | Last | Forward | Next }

Increase or decrease the Cycle number by 1. If different Min and Max limits are in effect, the Min limit is adjusted and used for both the Min and Max limit.

TRACK Kcycle { ACtive | BOth | Inactive }

Limit histories to Active, Inactive Cycles, or Both. All histories from cycles of the chosen Type are shown if no Kcycle Min or Max filter is in effect.